Pump Neròn HPP 615
MODEL : HPP 615
TYPE : Base & Automatic
FEATURES :
- FEEDING: Selfpriming or discharge
- CALIBRATION : Unloader valve
- SECONDARY FLUID : Fresh water, Glycole, Chemicals
- WATER TEMPERATURE : Cold or hot water up to 60° C
- OIL TEMPERATURE : Max 70 °C
- OIL FLOW : Up to 80 l/m with flow limiting valve
- RISK : None, safety devices adopted both oil and water side
- MATERIAL : Brass, Anodized aluminium, Stainless steel, Special seals
- PISTON MATERIAL : Ceramic allumina 99% & stainless steel
- DIMENSION : 244x60x57 mm
- WEIGHT : 10 Kg
- INLET AND OUTLET OIL PORT : ½” BSP F
- WATER INLET PORT : ½” BSP F
- WATER OUTPUT PORT : SSK; M22x1,5; 1/4” BSP F
BENEFITS :
Technically unbeatable
Full power and trust
Small size
Easy to carry
Simple installation
Connect and use
Installation in any position
Safety devices adopted
Low noice and low vibrations
Running in any environment conditions
Water cost and volume saving
Low maintenance required
Long life thanks to the oil self-lubrication
Anti explosion, Anti sparks, Anti electric shock
Connection with chemical ejector, soap, solvents or additives
Cost effective
PERFORMANCE :
|
WORKING CONDITIONS |
Oil inlet data | Water output data | |||||
| Oil flow into (Q1) | Oil pressure into (P1) | Water flow to the nozzle (Q2) | Water pressure to the nozzle (P2) | Nozzle Ø mm | Water suction | Power KW | |
| Min | 20 L/min | 120 bar | 7 L/min | 210 bar | 0,8 | Selfpriming-discharge | 4 |
STD* |
23 L/min | 190 bar | 9 L/min | 280 bar | 0,9 | Selfpriming discharge | 7 |
| MAX | 25 L/min | 220 bar | 10 L/min | 290 bar | 0,8 | Selfpriming-discharge | 11 |
*STD Standard calibration done by Neròn. Different or adjusted calibration done upon customer’s request. The above stated values are subject to variations depending on the oil temperature of the hydraulic system.
ACCESSORIES :
Water filter brass, hose barb, pressure gauge. Flow and pressure limiting valve block (on request)
Enquiry about Pump Neròn HPP 615
