HPI 8.0
MODEL : HPI 8.0
TYPE : Base
FEATURES :
- FEEDING : Discharge
- CALIBRATION : Unloader valve
- SECONDARY FLUID : Fresh water, salt water, glycole, chemicals
- WATER TEMPERATURE : Cold or hot water up to 60° C
- OIL TEMPERATURE : Max 70 °C
- OIL FLOW : Up to 80 l/m with flow limiting valve and unloader
- RISK : None, safety devices installed both oil and water side
- MATERIAL : Brass, bronze, stainless steel, special seals
- PISTON MATERIAL : Stainless steel
- DIMENSION : 245x115x130 mm
- WEIGHT : 18 KG
- INSTALLATION : On one side of the pump
- INLET AND OUTLET OIL PORT : ½” BSP F
- WATER INLET PORT : ½” BSP F
- WATER OUTPUT PORT : SSK; 1/4” BSP F
BENEFITS :
Technically unbeatable
Full power and trust
Small size
Easy to carry
Simple Installation
Connect and use
Installation in any position
Safety devices installed
Low noise and low vibrations
Running in any environment conditions
Water cost and volume saving
Low maintenance required
Long life thanks to the oil self-lubrication
Anti explosion, anti sparks, anti electric shock
Use with salt water
Working up to 5000 mts from sea level and/or in extreme conditions
Subsea use
PERFORMANCE :
|
WORKING CONDITIONS |
Oil inlet data | Water output data | |||||
| Oil flow
into (Q1) |
Oil pressure
into (P1) |
Water flow to the nozzle (Q2) | Water pressure to the nozzle (P2) | Nozzle Ø mm | Water suction | Power KW | |
| Min | 20 L/min | 140 bar | 4 L/min | 560 bar | Minimum 1 bar | 4,5 | |
STD* |
23 L/min | 190 bar | 4,6 L/min | 760 bar | Minimum 1 bar | 7 | |
| MAX | 25 L/min | 200 bar | 5 L/min | 800 bar | minimum 1 bar | 8 | |
*STD Standard calibration done by Neròn.. Different or adjusted calibration done upon customer’s request.
The above stated values are subject to variations depending on the oil temperature of the hydraulic system.
ACCESSORIES :
Brass water filter, hose barb, flow and pressure limiting valve (on request)
Enquiry about HPI 8.0
