Pump Neròn HWB 8040
MODEL : HWB 8040
TYPE : By-pass
FEATURES :
- FEEDING : Self priming (up to 5 mt ) or discharge
- CALIBRATION : Unloader valve or piloted by-pass valve
- SECONDARY FLUID : Fresh water, Glycole
- WATER TEMPERATURE : Cold or hot water (up to 80°C), Water by-pass to tank (by-pass)
- OIL TEMPERATURE : Max 70 °C
- RISK : None, Safety devices adopted both oil and water side
- MATERIAL : Anodized aluminium, Stainless steel, Brass, Special seals
- PISTON MATERIAL : Stainless steel
- OIL FLOW : Max 20 l/m
- DIMENSION : 270 x 121 x 125 mm
- WEIGHT : 7.5 Kg
- INSTALLATION : Fixing holes on two sides
- INLET AND OUTLET OIL PORT : ½” BSP F
- WATER INLET PORT : ¾” BSP M
- WATER OUTPUT PORT : M22x1,5 – ½” BSP M – 3/8” NPT F
BENEFITS :
Technically unbeatable
Full power and trust
Small size
Easy to carry
Simple installation
Connect and use
Installation in any position
Safety devices adopted
Running in any environment conditions
Water cost and volume saving
Low maintenance required
Long life thanks to the oil self-lubrication
Anti explosion, Anti sparks, Anti electric shock
Cost effective
Low noise and low vibration
PERFORMANCE :
|
WORKING CONDITIONS |
Oil inlet data | Water output data | |||||
| Oil flow into (Q1) | Oil pressure into (P1) | Water flow to the nozzle (Q2) | Water pressure to the nozzle (P2) | Nozzle Ø mm | Water suction | Power KW | |
| Min | 18 L/min | 180 bar | 37 L/min | 60 bar | 4,2 | Selfpriming-discharge | 5 |
STD* |
23 L/min | 195 bar | 39 L/min | 70 bar | 4,2 | Selfpriming discharge | 7 |
| MAX | 25 L/min | 210 bar | 42 L/min | 80 bar | 4,2 | Selfpriming-discharge | 8,5 |
*STD Standard calibration done by Neròn.. Different or adjusted calibration done upon customer’s request. The above stated values are subject to variations depending on the oil temperature of the hydraulic system.
ACCESSORIES :
Water filter ¾” BSP FF 80 mesh, hose barb
Enquiry about Pump Neròn HWB 8040
